How To Remove A Car Wheel
If you get a flat tire on your car then you’re going to have to change it, and put your spare on. We have created a step by step guide below so that you can learn how to change your car tire without any issues.
1. Remove the car jack, wheel brace and locking nut from there stored location.
2. Place the jack under the jacking point of your car, and turn the jack handle until it is in place but not taking the whole weight of the car.
3. Loosen the wheel nuts slightly, so that you don’t have to place great turning force on the jack later which could then in turn possibly displace the jack and damage the car. If the nuts are really tight then either try a longer wheel brace or place some piping over the smaller brace to extend it.
4. Once the wheel nuts are loosened slightly, and then lift the car fully using the jack.
5. Ideally the best way to remove the wheel nuts is the left and right nuts then the bottom nut and finally the top nut, but be aware that when you remove the top not that there might be nothing holding your wheel to the car. So watch feet and fingers.
To put the wheel back on just simply reverse the process. Make sure that the nuts / bolts are tight if in doubt get a 3rd party to check them for you.
Car Flat Tire
Socialize